Sprinkler System Tune-Up
Start the season off right.
Want the best lawn in the neighborhood and use less water? Well we have the answers right here. Every spring we turn the water on and fight through the garage to find our sprinkler controller. We rush to turn it on and walk away, all while hoping for the best. While this may have worked in years past, it is the quickest way to set yourself up for failure.
Here are 10 easy steps to getting the best lawn and using less water.
- Wait for the right time. Every spring it seems like we get a few good days of nice weather and people rush to turn their sprinklers on. Then, without fail, we get that spring snow storm and usually plenty of spring rain. By letting Mother Nature bring your grass out of dormancy in the spring, you are
- Turn the water on slowly and check for leaks. Winters can be harsh on sprinklers and any water left in the line can cause serious damage. Start off right by making sure that visible joints, valves, and your backflow preventer are drip free. Even small leaks can result in thousands of gallons of wasted water.
- Check for buried or sunken sprinklers. Grass is
- Check for broken sprinklers. Go through your yard and look for any broken sprinklers that are not spraying well. Replace broken heads and nozzles, and make sure you replace them with the same model. Mixing heads and nozzles throughout your zone can lead to improper coverage and lots of water waste.
- Check the coverage. Poor coverage can lead to dry spots and typically results in overwatering to compensate for areas that are being missed. One of the best ways to reduce dry spots in your turf is to ensure head to head coverage. Head to head coverage or 100% overlap is the ideal set up for your grass. To ensure this coverage, look at the spray (or throw) of each sprinkler and make sure it is hitting the heads that are adjacent to it. If you are not achieving good coverage, use adjustable nozzles to change the throw distance.
- Clean screens and filters. Clogged sprinklers can lead to improper spray and can ruin a nice green lawn in a hurry. Taking a few minutes now to go through your filters and clean or replace them can keep your lawn at its best.
- Set the proper schedule. A good watering schedule can be one of the greatest ways to keep your lawn green and save water. The best way to set up a good schedule is to use the tools that already exist. RainBird has a scheduling tool that will work with any sprinkler controller. Visit http://www.rainbird.com/support/RunTimeCalculator/ and follow the easy steps to set up a schedule specific for your area.
- Adjust your controller for the season. One of the best ways to save water is to make sure your schedule is adjusted for the season. It is easy to set it once and not look back, but this can cost you hundreds of dollars in wasted water. While your lawn may need water every other day in the heat of the summer, it’s likely that in May and October it may need it every third or fourth day. Many new controllers offer seasonal adjust, but for those that don’t, schedule dates on your calendar to increase or decrease the times you water.
- Use rain delay or a rain sensor. Most controllers come with a rain delay button and many new controllers offer options to use rain sensors. Using these functions can save thousands of gallons of water each year. Check your local weather report and if rain is in the forecast, turn the sprinklers off and watch your water savings increase.
- Watch the grass grow. Remember that a good lawn needs care and maintenance. Keep an eye out for dry spots, and rather than increasing your run times, use a hose to spot water. Also avoid cutting your lawn too short, your grass needs less water if you leave it a little longer and only cut the top third.